Case study:Avon Barriers Project: Ferengair Weir: Difference between revisions

From RESTORE
Jump to navigation Jump to search
No edit summary
No edit summary
Line 19: Line 19:
|Project picture=Fernegair_Weir.jpg
|Project picture=Fernegair_Weir.jpg
|Picture description=Fernegair Weir
|Picture description=Fernegair Weir
|Project summary=Fernegair Weir
|Project summary=Fernegair Weir is one of two barriers on the Avon Water that are the focus of the Avon Barriers Project. This project is being undertaken in partnership between The Rivers & Fisheries Trust for Scotland, SEPA, South Lanarkshire Council and the Clyde River Foundation.
 
Ferniegair weir is approximately 60m wide. The crest has a lower section at the left bank (looking downstream). The majority of the crest is approximately 2.5m above the downstream bed level. The structure is skewed to the direction of flow at an angle of approximately 30 degrees.
 
Historical maps indicate that there has been a mill on this site since at least the mid-1700s, predating the railway viaduct and the A72 bridge. It is therefore likely that there has been some form of impoundment in the river at this general site for some time. OS Mapping from an 1858 survey indicates a “dam” present at the site of the current weir, and no railway viaduct at this time (see Figure 2-3). It is estimated that the present weir was built between 1880 and 1920.
 
No as-built drawings are available for the structure. Previous reports suggest that the construction of the weir is timber frame, which has since been encased with a concrete apron in the 1940’s. It is believed that this was built directly onto the bedrock which outcrops along much of the reach.
 
Feasibility & optioneering for improving fish passage across this structure has just been completed and the options are being assessed with a view to moving forward to design and build.
|Monitoring surveys and results=The RAFTS habitat scores highlight this weir and the upstream weir at Millheugh as the highest priority barriers in the Clyde catchment. Providing fish passage will open up significant areas (up to 35km) of excellent quality habitat to migratory salmonids.
}}
}}
{{Image gallery}}
{{Image gallery}}

Revision as of 16:28, 20 February 2015

This case study is pending approval by a RiverWiki administrator.

Approve case study

 

0.00
(0 votes)


To discuss or comment on this case study, please use the discussion page.


Location: 55° 46' 3.70" N, 4° 1' 22.57" W
Loading map...
Left click to look around in the map, and use the wheel of your mouse to zoom in and out.


Project overview

Edit project overview
Status In progress
Project web site
Themes Fisheries, Habitat and biodiversity
Country Scotland
Main contact forename Alan
Main contact surname McCulloch
Main contact user ID User:Alan.McCulloch
Contact organisation Scottish Environment Protection Agency (SEPA)
Contact organisation web site http://www.sepa.org.uk
Partner organisations Rivers and Fisheries Trusts of Scotland
Parent multi-site project

Case_study:Avon Barriers Project

This is a parent project
encompassing the following
projects
No
Fernegair Weir

Project summary

Edit project overview to modify the project summary.


Fernegair Weir is one of two barriers on the Avon Water that are the focus of the Avon Barriers Project. This project is being undertaken in partnership between The Rivers & Fisheries Trust for Scotland, SEPA, South Lanarkshire Council and the Clyde River Foundation.

Ferniegair weir is approximately 60m wide. The crest has a lower section at the left bank (looking downstream). The majority of the crest is approximately 2.5m above the downstream bed level. The structure is skewed to the direction of flow at an angle of approximately 30 degrees.

Historical maps indicate that there has been a mill on this site since at least the mid-1700s, predating the railway viaduct and the A72 bridge. It is therefore likely that there has been some form of impoundment in the river at this general site for some time. OS Mapping from an 1858 survey indicates a “dam” present at the site of the current weir, and no railway viaduct at this time (see Figure 2-3). It is estimated that the present weir was built between 1880 and 1920.

No as-built drawings are available for the structure. Previous reports suggest that the construction of the weir is timber frame, which has since been encased with a concrete apron in the 1940’s. It is believed that this was built directly onto the bedrock which outcrops along much of the reach.

Feasibility & optioneering for improving fish passage across this structure has just been completed and the options are being assessed with a view to moving forward to design and build.

Monitoring surveys and results

Edit project overview to modify the Monitoring survey and results.


The RAFTS habitat scores highlight this weir and the upstream weir at Millheugh as the highest priority barriers in the Clyde catchment. Providing fish passage will open up significant areas (up to 35km) of excellent quality habitat to migratory salmonids.

Lessons learnt

This case study hasn’t got any lessons learnt, you can add some by editing the project overview.


Image gallery


ShowHideAdditionalImage.png


Catchment and subcatchment



Site

Name
WFD water body codes
WFD (national) typology
WFD water body name
Pre-project morphology
Reference morphology
Desired post project morphology
Heavily modified water body
National/international site designation
Local/regional site designations
Protected species present
Invasive species present
Species of interest
Dominant hydrology
Dominant substrate
River corridor land use
Average bankfull channel width category
Average bankfull channel width (m)
Average bankfull channel depth category
Average bankfull channel depth (m)
Mean discharge category
Mean annual discharge (m3/s)
Average channel gradient category
Average channel gradient
Average unit stream power (W/m2)


Project background

Reach length directly affected (m)
Project started
Works started
Works completed
Project completed
Total cost category
Total cost (k€)
Benefit to cost ratio
Funding sources

Cost for project phases

Phase cost category cost exact (k€) Lead organisation Contact forename Contact surname
Investigation and design
Stakeholder engagement and communication
Works and works supervision
Post-project management and maintenance
Monitoring



Reasons for river restoration

Mitigation of a pressure
Hydromorphology
Biology
Physico-chemical
Other reasons for the project


Measures

Structural measures
Bank/bed modifications
Floodplain / River corridor
Planform / Channel pattern
Other
Non-structural measures
Management interventions
Social measures (incl. engagement)
Other


Monitoring

Hydromorphological quality elements

Element When monitored Type of monitoring Control site used Result
Before measures After measures Qualitative Quantitative

Biological quality elements

Element When monitored Type of monitoring Control site used Result
Before measures After measures Qualitative Quantitative

Physico-chemical quality elements

Element When monitored Type of monitoring Control site used Result
Before measures After measures Qualitative Quantitative

Any other monitoring, e.g. social, economic

Element When monitored Type of monitoring Control site used Result
Before measures After measures Qualitative Quantitative


Monitoring documents



Additional documents and videos


Additional links and references

Link Description

Supplementary Information

Edit Supplementary Information